For users who first use gas-liquid booster pump, it is very common to encounter some problems. As long as we know the solution to the fault of the gas-liquid booster pump, it is not difficult to solve it. The following sections summarize the seven aspects of the problem.
Fault 1: The working frequency of the gas-liquid booster pump is too low.
Solution: The pipeline configuration or interface of the gas-liquid booster pump is small, and the diameter of the gas element or gas pipe in the pipeline should be appropriately increased.
Fault 2: The guide resistance of the gas-liquid booster pump is too large.
Solution: readjust the verticality of the installation of the gas-liquid booster pump.
Fault 3: The lifting force of the gas-liquid booster pump is not enough.
Solution: Carefully check the lifting force of the gas-liquid booster pump and reorder the gas-liquid booster cylinder
Fault 4: The preloading stroke of the gas-liquid booster pump is not in place.
Solution: reduce the mold height of gas-liquid booster pump.
Fault 5: The gas-liquid booster pump is pressurized in advance.
Solution: reset the action time of gas-liquid booster pump.
Fault 6: The spring force of the gas-liquid booster pump mold is greater than the pre pressure.
Solution: Replace the gas-liquid booster cylinder on the gas-liquid booster pump to extend the booster stroke.
Fault 7: The working frequency of the gas-liquid booster pump is too fast.
Solution: Control the working frequency of gas-liquid booster pump within the rated range.
Therefore, users who use the gas-liquid booster pump for the first time should avoid seven problems. Of course, remember to maintain it in time when using it in ordinary days. More relevant content will come to our website http://www.allarabandroid.com Consult!