After using the gas booster pump for a period of time, the booster pump will not work or the pressure will be slow. Now I will tell you the causes and solutions of several common faults of gas booster pump through performance analysis.
1. Fault performance: when the driving gas pressure is not less than 20psi, the driving part does not work or does not circulate.
Possible causes: the air supply pipeline is blocked or the air supply is insufficient; The air circulation valve is blocked; Icing at the discharge port; The muffler is blocked.
resolvent; Check the gas supply pipeline and air pressure regulating valve; Disassemble the air circulation valve and clean it with the allowable solvent; The water content of the driving gas is high, and better drying equipment is used; Remove the muffler for cleaning.
2. Fault performance: under load, the driving part does not work, and there is continuous gas discharge at the reversing exhaust port.
Possible causes: the spring of the reversing needle is damaged or unsuitable; The O-ring at the end of the reversing needle is not suitable or loses its function.
resolvent; Replacement spring; Replace the O-ring.
3. Fault performance: the driving part does not work; The muffler leaks air.
Possible causes: insufficient driving gas flow; The seal of the air circulation valve core shrinks or is damaged.
resolvent; Increase the flow rate of driving gas; First, check the seal of the air circulation valve core. If it is damaged, replace it, assemble it and retest it; If there is no damage, check the drive part seal.
4. Fault performance: the driving part works, but the gas is not pressurized.
Possible cause: check valve seal or high pressure part of gas compression part.
This is how to analyze the common faults of booster pump through performance. If you have any doubts about this, please come to our website at any time http://www.allarabandroid.com For consultation, customer service personnel will serve you wholeheartedly!