Gas booster pump and gas-liquid booster pump are widely used in industrial field. They have the characteristics of high reliability, maintenance free and long service life. Their working principle is the same. Although these two types of pump products belong to the same gas booster pump, their booster media are different. I would like to remind you that gas booster pump and gas-liquid booster pump can not be mixed!
It can be seen from the name that the gas booster pump is mainly used to pressurize gases (nitrogen, helium, oxygen, etc.), while the liquid booster pump is mainly used to pressurize liquids (water, hydraulic oil, emulsion, etc.); Although the working principle of the two is the same, the pressurized part is different. The pressurization part of the gas booster pump is piston type, and the pressurization part of the gas-liquid booster pump is plunger type.
The gas-liquid booster pump cannot be used for gas pressurization. This is because there is a gap in the working chamber of the gas-liquid booster pump. In the compression chamber, the gas will be compressed and expanded. However, it is worth noting that the gas cannot be compressed.
Compressed, and for the gas booster pump, most of them are also used to pressurize gas, and rarely used in liquid pressurization. Therefore, generally, the gas booster pump and gas-liquid booster pump cannot be mixed, which is also because the two pumps use different sealing structures. Therefore, it must be remembered that gas booster pump and gas-liquid booster pump cannot be mixed.
In addition, booster pump is the core configuration of all kinds of pressure equipment. Although the booster pump with good reputation has excellent performance, it still needs to pay attention to standardized operation and timely good maintenance in order to prolong its service life in the face of various equipment and environments.
Before use, the booster pump shall be adjusted according to the working environment and the operating object and the actual working conditions. The operation speed of the whole hydraulic equipment is not the faster the better, but also to meet the safe operation speed range of the booster pump. Exceeding the specified operating speed will cause fail safe problems. And because the high-speed operation exceeds the standard, it will also lead to problems in all lines, and the booster pump will stop working.
When the booster pump is running, the system has high requirements for the purity of oil products. The operator is required to strictly control the cleanliness of oil products in daily use to avoid pollution, and regularly check the performance of oil products to ensure the smooth process of the whole equipment. After the oil products are polluted, it is necessary to fine filter or replace with new working oil.
Before each use, the normal use function of the booster pump must be checked, especially whether the physical parts are intact and loose. It is very important to check the stability of the equipment before use, which will directly affect the safety of the whole operation. For more information, please visit www.allarabandroid.com Com follow and understand!