Before storage, check each package for damage. In case of damage during transportation, the extent of damage shall be strictly evaluated, recorded and immediately notified to the supplier in writing (to obtain relevant storage suggestions).
Before storage, unpacking acceptance shall be carried out - carefully check whether the specifications (dimensions), materials, etc. of the products and spare parts supplied are consistent with the list? Is there any sign of damage?
The bearing capacity of the floor in the storage area must be properly designed and constructed.
All parts provided shall be stored in a dry room with the air humidity as constant as possible.
If stored outdoors, the gas-liquid booster pump unit and crate must be covered to form a waterproof barrier to protect them from water droplets, so as to avoid any contact with moisture.
It is not allowed to store elastic material parts with chemicals, solvents, fuels or acidic substances. In addition, it is necessary to keep away from light storage, especially from direct sunlight and artificial strong light with high ultraviolet rays.
The storage time of gas-liquid booster pump set and spare parts will affect their storage mode. If you don't know how long the spare parts will be stored, please be conservative. Regardless of the storage period, correct procedures and good records are essential. Environmental control shall at least include temperature, humidity, air pollution and vibration reduction.
Spare bearings not installed shall be kept in the original equipment manufacturer's packaging and stored horizontally. The storage time of sealed (grease lubricated) bearings shall not exceed five years. Non-rolling bearings may have a series of storage problems, so please consult the manufacturer of gas-liquid booster pump.
Is the used gas-liquid booster pump stored in a proper place or in the installation area? In most cases, it is necessary to remove the gas-liquid booster pumping products and spray or atomize the metal surface of the flow passage with anti-corrosion oil. At the same time, coat all exposed machined surfaces.
The storage location and method of spare parts are one of the important factors to be considered. Especially in case of poor humidity control. Constant temperature and humidity are critical for successful storage because they reduce condensation that can lead to corrosion.
The protective agent placed in the gas-liquid booster pump must be clearly marked and recorded so that it can be removed before the gas-liquid booster pump is put into use. The drying dosage used is a function of the shell volume of the gas-liquid booster pump. Come to our website for more relevant content http://www.allarabandroid.com Ask!