The gas booster pump is coated with grease during assembly. The role of grease on gas booster pump is not only lubrication, but also cooling and noise reduction. However, as the driving gas pushes back and forth in the cavity of the gas booster pump, the grease on the piston of the gas booster pump will be carried out by the gas, and dry wear will occur after a long time.
Once the dry grinding gas booster pump works again, the sealing ring inside it will increase the friction and shorten the service life. Therefore, Shandong Xinnuo gas booster pump needs to be equipped with an air filter and water separator under any circumstances, and can also be equipped with a gas control unit: including a filter equipped with a water separator, a pressure reducing valve, a pressure gauge, a shut-off valve, etc. Hydraulic oil needs to be added into the oil cup behind the triplet.
When wet gas or high humidity gas is used for continuous operation, icing will occur. In this case, it is recommended to install a water separator or dryer in the air drive pipeline. If the driving air is too dry and the dew point is lower than - 40 ℃, it is recommended to use an oil mist. Selecting excellent driving gas can prolong the service life of liquid pump seals.
The IN (inlet) pressure of the gas booster pump and the booster part of the gas booster pump is equipped with a filter to ensure the cleanness of the pressurized gas medium and play the role of secondary protection. In addition, if the pressure at the high-pressure outlet is too high, it is proposed to install bursting discs and other safety protection measures. If the high pressure outlet needs to be equipped with a buffer tank, it is necessary to purchase a pressure vessel with a pressure value higher than the rated output pressure of the pump body (with a pressure vessel certificate).
When the gas booster pump is maintained again, it must be maintained without air pressure. Turn off the drive, turn off the inlet pressure, and unload the high pressure output pressure before maintenance. In addition, it is recommended to communicate with technical personnel or conduct maintenance under video guidance.
In addition, whether the continuous operation of the gas booster pump system has any impact depends on the actual situation on the site. Some can be used continuously for 24 hours, and some cannot. In this case, it is necessary to make detailed instructions according to the site conditions and the manufacturer to prevent the service life of the gas booster pump from being shortened due to improper use. Come to our website for more relevant equipment content http://www.allarabandroid.com Ask!