After using the gas booster pump for a period of time, there will be failures such as the booster pump does not work or the pressure is slow. Now Xiaobian will analyze the causes and solutions of this situation through the performance of several common failures of the gas booster pump.
1. Fault performance: when the driving gas pressure is not lower than 20psi, the driving part does not work or circulate.
Possible causes: the air supply pipeline is blocked or the air supply is insufficient; The air circulation valve is blocked; The discharge port is frozen; The muffler is blocked.
resolvent; Check the gas supply pipeline and air pressure regulating valve; Disassemble the air circulation valve and clean it with allowable solvent; The water content of the driving gas is high, so better drying equipment should be used; Remove the muffler for cleaning.
2. Fault performance: under load, the driving part does not work, and there is continuous gas discharge at the reversing exhaust port.
Possible causes: the spring of the reversing needle is damaged or unsuitable; The O-ring at the end of the reversing needle is not suitable or loses its function.
resolvent; Replace the spring; Replace the O-ring.
3. Fault performance: the driving part does not work; The muffler leaks air.
Possible causes: insufficient flow of driving gas; The seal of the air circulation valve core shrinks or is damaged.
resolvent; Increase the flow of driving gas; First, check the seal of the air circulation valve core. If it is damaged, replace it, assemble it and retest it; If there is no damage, check the drive part seal.
4. Fault performance: the driving part works, but the gas is not pressurized.
Possible causes: the one-way valve seal of the gas compression part or the high-pressure part is damaged.
resolvent; Check the check valve and high pressure end.
This is the reason for the failure of the booster pump. I hope I can help you. Please come to our website for more relevant information http://www.allarabandroid.com Consult!