The pneumatic Booster pump is a plunger pump controlled by a two position four-way pilot valve to reciprocate. Using gas pressure to transmit energy, the pneumatic device has a simple and lightweight structure, easy installation and maintenance, and the medium is air, which is less flammable compared to hydraulic medium. Therefore, it is used. The selection of pneumatic Booster pump should be considered from many aspects, which can ensure that the standards of these parameters meet the conditions that bring convenience to our use, thus fundamentally ensuring the working efficiency. The selection of pneumatic Booster pump shall be considered from the following aspects:
1. Working pressure and flow rate
The working pressure refers to the pump output pressure and flow rate when the driving air pressure is 0.48Mpa. If the output pressure of the pump is greater than the required working pressure, measures should be considered.
2. Pressure and flow rate of driving gas
The driving air pressure used during continuous operation does not exceed 0.69Mpa, and can reach 1.03Mpa during intermittent operation. Please refer to the required driving gas flow rate table for the air consumption of the pneumatic pump in good performance state.
3. Conveying liquid medium
The liquid medium delivered by the pump is a key consideration in the selection of pneumatic Booster pump. The material and hydraulic sealing ring of the hydraulic part are determined by the liquid medium conveyed. Pumps can be used with oil, water, and most liquid media. The main hydraulic sealing rings of the standard pump are neoprene and polyurethane, and the one-way valve seat is sealed with Teflon. Other sealing materials include Fluorocarbon and ethylenepropylene, which are mainly used for conveying special media. Please consult the factory or local distributor for sealing material selection.
4. Acceptable volume and weight For some applications, the overall dimensions and weight of pneumatic Booster pump and power unit should also be considered.
The pneumatic Booster pump can ensure that the standards of these parameters meet the conditions that bring convenience to our use, thus fundamentally ensuring the working efficiency of starting the Booster pump.