The gas-liquid booster pump is a kind of pump product, which is powered by compressed air and based on the principle of area difference to continuously output hydraulic oil or other liquids according to a fixed boosting ratio and serves as a high-pressure power source. It is a variable plunger pump integrating power source. In order to better use it, you need to master more information.
At the initial stage of the compressed air connection, the circulation speed is fast and the output liquid flow is large. With the gradual increase of the output pressure, the resistance of the piston becomes larger and larger, and the circulation speed of the pump becomes slower and slower. When the reaction force of the output pressure to the piston and the gas driving force reach balance, the pump will automatically stop.
At this time, the pump is in a pressure maintaining state and does not consume any energy, so it provides an economic power source. When the output pressure drops or the supplied air supply pressure rises due to leakage or other reasons, the pump will start immediately to supplement the pressure to the system. This is due to the low friction resistance of the pump itself and ensures the stability of the output pressure.
The pulsation of the double acting pump is smaller than that of the single acting pump, the output pulsation is smaller, and the output flow is 50% higher than that of the single acting pump of the same series.
After the pressure is established, the pump will stop automatically, no noise, no energy consumption, and more environmentally friendly.
There is no temperature rise of the working medium, and it is suitable for use in summer and hot and ventilated places.
No power supply required, suitable for non power or explosion-proof occasions.
Small size and flexible configuration. It can bring its own oil tank or supply oil at the remote end to save installation space. The output pressure can reach hundreds of MPA, but the price difference between products with different output pressures is not large.
The pressure has no impact, is safer, and has no damage to equipment and parts.
It is convenient for maintenance. The structure design of the pump body is modular. All vulnerable parts are standard parts, which is convenient for installation and disassembly. The pneumatic drive does not require additional on-line lubrication pipeline, which not only saves the operating cost but also avoids the pollution of oil mist to the environment and human body.
Frequent start and stop have no adverse effect on the pump.
Reserve seal leakage overflow hole to protect the pump body and find the pump fault in time.
The directional valve is installed externally, which is convenient for maintenance and replacement and has a longer service life.
Within the pressure range of the pump, the output liquid pressure can be adjusted accordingly by adjusting the input air pressure.
From simple manual operation to full-automatic control according to the requirements of on-site working conditions.
The pressurizing medium is various, and water, oil, coolant, lubricating oil and corrosive fluid can be used.
This is the end of the multi-faceted understanding of the working principle of the gas-liquid booster pump. If you are interested in learning about the equipment or have purchasing needs, please follow our website http://www.allarabandroid.com Yes, please ask for more information.